I started with the rear backsplash for the shelf at the top. This one went pretty well. I used my
Rockler Clampit and it did a good job.Hall Tree assembly part 1
Rabu, 30 Maret 2016
This is the bottom with the apron in the front. Since the pocket holes are on the inside I put the Clampit on the outside. In hindsight I should have put the clamps all the choice to the inside of the Clampit. I had put them further out to allow me to get the drill to the pocket hole but I think putting the clamps all the choice inside would have worked better. The wood ended up drifting and one of the screws split the edge of the front corner.
I forced some glue into the split and clamped it and you can barely tell now. I just need to do some sanding and after I paint it you will never know.
I got the top shelf mounted, glued and screwed in and I was very happy with the result.
Only the top shelf, backsplash, and bottom front apron are actually attached. I dry fit the rest to see how it looks. I hope to get the rest of it assembled tonight.
?
?
Related Posts by Categories
Langganan:
Posting Komentar (Atom)
0 komentar:
Posting Komentar