Dylans Clock Stand

Last Saturday my son displayed his art in a show with his art class at the Central Park Zoo. It was a well received show and outside of heat, it was a wonderful day. My frame was actually well received, sloppy corners an all. Luckily though, I was able to make a second piece to help display his art and this one came out much nicer.

Dylans art show display

One of his three (3) dimensional projects was a clock. It’s a collage of clocks glued onto a box, with a round porthole cut out to reveal a clock face inside also.

Since the clock just sits on whatever you put it, I was asked to make a clock stand.

Initially I was going to make a low stand with ornate feet. As the deadline approached I was looking through The Complete Illustrated Guide to Furniture & Cabinet Construction. After thumbing through the section on feet and basically deciding on making a rounded base with mitered legs, I then flipped through the cabinet on stand section. I occurred to me that I could make a tall stand for the clock rather than a stubby one.

With that idea in my head, I went out to the shop and started milling legs and aprons. I was making a tiny shaker table to hold the clock.

Should I clean my table saw blade.

I won’t go into too much detail on the table, as there are many resources online for making a shaker end table (I’d personally recommend the Shaker End Table Woodwhisperer Guild Project).

The one thing that I was rather pleased about regarding the table construction was the mitered frame is used as a top to hold the Clock. After having issues cutting miters on my table saw with my Incra jig, I chose to make these on my miter saw. When I cut a test piece and held it against a japanese miter square I have, I was pleasantly surprised to find the miter saw was perfect. I cut all eight miter cuts on the miter saw and the frame came together 100% gap free.

The finished clock stand with the clock atop.

Perfect miters right off the miter saw.

Related Posts by Categories