Beginning Tool Collection

Here is a list of my wood working specific tools which I am starting out with.

Tools I inherited with the boat which I have removed rust, serviced and cleaned as best as possible in WD40 & light oil:

3 x Small F-Clamps

3 x Medium F-Clamps

Panel Saw ~10tpi rip (Old Self Sharpen Style)

12" Back Saw ~12tpi rip (Old Self Sharpen Style)

Bit & Brace (with ratchet function)

Egg Beater Hand Drill - (broken handle)

Small Hammer

3 Wood Rasps (Flat, Half Round & Round)

12Pc Carving Set (looks cheap)

7pc Hole Cutter Set 32 - 70 mm

Spade Drill Bits - 28, 25, 23, 16, 13, 12 mm

Forstner Drill Bits - 15, 20, 25, 30, 35 mm

Various Lip & Spur (Brad Point) Bits

Wood Plug Cutters & Bits

After some time reading about wood working online and learning about tools and their specific uses, I decided about 6 months ago during one of my visits to the U.K I should purchase a few new tools to compliment those above and try to have a go while living on my boat in the Caribbean. The tools remained untouched aside from a few Pre-Atlantic crossing boat preparations and repairs and have only just now been unpacked.

Everything came from my local ScrewFix store and I have provided links.

Stanley No4 Smoothing Bench Plane

Stanley Block Plane

Stanley Metal Sureform Block Plane

Stanley FatMax 5pc Bevel Chisels

Stanley FatMax Coping Saw

Stanley 23tpi Flush Cut Saw

Irwin 12" Pullsaw 14tpi

Stanley Stone & Honing Guide

Stanley Bevel Guage

Combination Square

Wooden Mallet

3m Imperial / Metric Tape Measure

12" Steel Ruler

I do own other assorted none specific tools such as screw drivers, files, pliers and spanners, etc, all of which Im sure will come in useful along the choice.

Tools I now realise I will probably need soon are some layout tools such as marking gauges and a good marking knife. More importantly, before anything else I need to sort out my space with some form of bench. Who knows at some point I might even get some wood as well.

Read More..

Moving Fillister for rebates and for making raised panels

The adjustable fence rebate plane is a wooden plane able to compete with its metallic sisters. This model I own, is a moving fillister and comes from UK, made by the planemaker William Kendall (York, 1818-1830). 

These planes have a sturdy structure, with side escapement and a skewed blade. The plane has a depth stop, adjustable by a brass thumb screw on the plane top. More, on the left side is also present a nicker, held by a wooden little wedge. Its function is to pre-cut the wood fibers while planing across the grain. On the bottom is the adjustable fence; two big screws stop it at the wished rebate width.The plane works very well along the grain as well as across the grain. For this reason I use to utilize it for making simple raised panels too.

 The first step is to trace the final thickness on all four edges.This dimension is the same of groove width, minus a quote (1 mm in this case with a 15 mm rebate) for permitting to the panel edge to be inserted correctly into the groove and to move in the case humidity changes were. The panel is worked across the grain first on both sides.

This trick allows to correct the possible tearout when the plane comes out from the piece.

With the nicker in cutting position trace the internal rebate width by moving the plane backwards for a couple of times. Then set the depth stop and cut the rebate.

In the successive step the plane is inclined on the left side for making the bevel. A ca.10°  slope (I cut it by eye) is enough for obtaining the wished effect.

The job finishes when the thickness mark is reached.

A piece of frame is useful for be sure the panel fits correctly in its groove. Repeat the same steps for longitudinal cuts, without nicker this time. Some little finishing by a shoulder plane and the panel is ready to be used.

Read More..